Playsation 3 using remote play on windows pc and How to Remove Write Protection of Any flashdrive/Memory Cards

Playsation 3 using remote play on windows pc 

 This recipe is for the Playstation3 / PS3 users out there that want to utilize the Remote Play features on their PS3. Normally, Sony allows Vaio branded laptops the ability to connect to the PS3 via Remote Play. With the help of 2 patched files from PSDevWiki, we can use the Remote Play software on any PC that has a wireless network adapter. (updated 4/3/2014) Credit to NTAuthority for the patch old, non-working patch and PSDevWiki devs for the new patch. PS3 firmware 3.30+ is required. Requirements: -Playstation 3 (original or Slim) with firmware 3.30 or higher (tested on latest as of 4/4/2014) -PC/Laptop running Windows 7 or Windows 8 (32bit/64bit) and WiFi adapter -Full administrator rights with Windows user account on PC/Laptop -Both devices on same network Software: -Remote Play Software v1.1.0.15070 (download from Sony here) -Patched v 1.1.0.15070 Dlls and EXE (download from PS3Wiki site) –Alternative MediaFire hosted Download w/both files (here) Instructions:

 1. Download both the installer file (EP0000248680.exe) and the patched .rar files (remoteplay 1.1 patch.rar)
 2. Run the installer file EP0000248680.exe and once it finishes, click on Finish.
 3. Extract the patched rar files using 7zip (free and excellent!) or whatever app you may have.
We now will need to copy these files to the Remote Play’s Program Files folder (32-bit OS: c:\program files\sony\remote play with playstation 3\ or 64-bit OS: C:\program files (x86)\sony\remote play with playstation 3\). If asked for administration permissions, click on Continue (ie Windows 8 computers).
 4. Finally, we can now launch the Remote Play by using the patched exe file we copied: rmp_launcher.exe . This will launch the Remote Play software and in turn the initial pairing wizard. We will want to make a shortcut to the rmp_launcher.exe since we need to run this launcher each time we use Remote Play to bypass the Vaio hardware check Sony put into the Remote Play software.
 Just right-click on the rmp_launcher.exe file and then choose Send To > Desktop. This put a shortcut right on our Desktop that we can in turn rename and even change the icon for. I personally move it into the C:\programdata\microsoft\windows\start menu\programs folder so that way it is available to all user accounts via the Start Mene. I also remove the shortcut that the installer creates since it launches VRP.exe directly and will give you this error. error-notpatched If you’re using a desktop with a wired network connection, you will need an external wireless adapter connected to initially pair. However once you have paired your PS3 and Desktop PC; you won’t need the adapter again.
 5. Go through the setup wizard. You will want to have your PS3 and PC on the same network for this initial pairing. On your PS3, go to Settings > Remote Play > Register Device to start pairing.
 6. Hopefully once your done with the wizard, you should be connected to your PS3!http://www.tech-recipes.com/rx/7225/playstation-3-use-remote-play-on-any-non-sony-vaio-windows-7-pc-ps3-firmware-3-30/

How to Remove Write Protection of Any flashdrive/Memory Cards 

 April 6, 2014 by raman Leave a Comment remove write protection from pendrive Now a day’s PC usage is common and everyone uses memory cards, pen drives to transfer data from one computer to another computer. In the recent days flash drives usage is increased tremendously because it is easy to carry and at the same time you can take GB’s of data with these tiny devices.http://www.alltechtricks.com/category/android/